(TSS-1) Touch Spot Set for Aqua-X System
Regular price €34,65 Save €-34,65An additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. TrolMaster's TSS-1 comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module. This is useful when trying to monitor for water spills or floods or to monitor water run-off at multiple locations.
For horticulture, hydroponics, and more.
Working Temperature : Working Humidity : Package Dimensions : |
0-50°F ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(TSS-2) Touch Spot Extension Cable for Aqua-X System
Regular price €17,33 Save €-17,33The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. TrolMaster's TSS-2 has a male and female end and can extend the distance between 2 sensors (or distance between WD-1 module and the sensor).
Working Temperature : Working Humidity : Package Dimensions : |
0-50°F ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(WCS-1) Water Content Sensor for Aqua-X System
Regular price €241,50 Save €-241,50TrolMaster's WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x (or Hydro-X Pro) and the APP. That data is displayed on a graph (through the APP) and helps the user visualize the dry-down time, and to make adjustments to their irrigation timers / irrigation cycles.
Up to 8 WCS-1 can be connected to a single Aqua-x. When multiple WCS-1 are connected to a single Aqua-X, the displayed value on the Aqua-x and APP will be the AVERAGE of all of the sensors.
* WCS-1 can only be used with the Aqua-X (NFS-1) and the Hydro-X Pro (HCS-2).
Input Voltage : Max Input Current : Working Temperature : Working Humidity : Measuring Range : Packaging Dimensions : |
12 VDC 0.1A 0-50°C ≤90% 0~100% 27.5cm(L) x 16.4cm(W) x 6.2cm(H) |
(WCS-2) Water Content Sensor
Regular price €325,50 Save €-325,50The WCS-2 is part of the next generation of substrate monitoring for temperature, EC, and water content.
TrolMaster’s WCS-2 Water Content Sensor is specifically designed to measure the water content data (percentage), temperature, and the EC of the grow media in the Aqua-X, Aqua-x Pro, and Hydro-X Pro Control System.
Each WCS-2 sensor includes a five-prong sensor assembly connected to a LCD communication module (Display Screen & Button). To use the WCS-2, the five prong sensor is inserted into the grow media such as soil or rock wool to be measured. Normally placed horizontally about ⅓ of the way up from the bottom of the grow media container or rockwool block. You can connect multiple Water Content Sensors (up to 50 WCS-2 on the NFS-2 and HCS-2 controllers, 8 on the NFS-1 controller). The NFS-2 screen will display the value of the 3 parameters (grow medium temperature, moisture level and EC) of each individual sensor.
When using TrolMaster’s free TM+ app, you can see the water content %, temperature, and EC of the grow media on your Smartphone. You can view historical data graphs on the app and also receive notifications if the WCS-2 readings exceeds your highest or lowest alarm settings.
* The WCS-2 can only be used with the Aqua-X / Aqua-X Pro and the Hydro-X Pro
Absolute Maximum Ratings
Supply Voltage : | 10.8-13.2 volts |
Input Current : | 100-200 mA |
Operating Current : | 140 typical mA (supply voltage=12V) |
Operating Temperature : | 0-50°C |
Storage Temperature : | 0-60°C |
Humidity : | ≤90% |
Packaging Dimensions: | 27.5cm(L) x 16.4cm(W) x 6.5cm(H) |
Range : | 0 - 100% |
Resolution : | 1 % |
Accuracy : | -5 - +5 % |
Range : | 0°-122°F |
Resolution : | 0.1°F |
Accuracy : | -1° - +1°F |
Range : | 0 - 5 mS/cm |
Resolution : | 0.01 mS/cm |
Accuracy : | -0.2 - +0.2 mS/cm |
(WCS-3) Water Content Sensor 3 with splitter cable set
Regular price €124,95 Save €-124,95The TrolMaster WCS-3 Water Content Sensor 3 is specifically designed to measure the moisture level (in percentage) of the grow medium. The WCS-3 can be used with the TrolMaster Aqua-X (NFS-1), Aqua-X Plus (NFS-3), Aqua-X Pro (NFS-2), Hydro-X Pro (HCS-2) and Tent-X (TCS-1) control systems. Each WCS-3 sensor is a 3-prong Volumetric Water Content (VWC) sensor. To use the W CS-3, you will insert the 3-prong sensor into the grow medium such as coir , soil or rock wool to be measured. You can connect multiple Medium Moisture Sensors to a single controller. Up to 5 0 WCS-3 can be connected to the NFS-2 and HCS-2 controllers, 20 o n the NFS-3, 8 on the NFS-1 controller, and 1 o n the TCS-1 controller. *NOTE: The TCS-1 can only have a single WCS-3 connected. Each WCS-3 features a built-in LCD display on one side of the sensor that becomes “live” and can be viewed when the sensor is shaken or disturbed. The display will show the current VWC% reading right on the sensor.
Absolute Maximum Ratings
Input Voltage : | 12V = 0.1A |
Input Current : | 100-200 mA |
Operating Current : | 140 typical mA (supply voltage=12V) |
Operating Temperature : | 0-50°C |
Storage Temperature : | 0-60°C |
Humidity : | ≤90% RH |
Packaging Dimensions: | 170mm(L) x 90mm(W) x 54mm(H) |
Measurement Details
Range : | 0 - 100% |
Resolution : | 1 % |
Accuracy : | -5 - +5 % |
Range : | 0°-122°F |
Resolution : | 0.1°F |
Accuracy : | -1° - +1°F |
(WD-1) Water Detector for Hydro-X & Aqua-X System
Regular price €77,18 Save €-77,18TrolMaster's WD-1 water detector can be used in one of two ways. First, it can be used to simply monitor the floor or space for water as a leak-detector. The other way the WD-1 can be used is as a water-verification monitor. When used in this way, the water detector is placed where runoff will accumulate (or where water is being introduced to the growing medium).
Each output (solenoid or pump) on the Hydro-X/Aqua-X can be “assigned” to a specific WD-1. Every time the solenoid or pump assigned to the WD-1 is activated by the Hydro-X/Aqua-X, the WD-1 must detect water within an adjustable delay time. If water is not detected (pump or solenoid failure) the Hydro-X/Aqua-X will send out a user alert notifying of the “irrigation failure”.
Up to 25 WD-1 can be connected to a single Hydro-X/Aqua-X.
Working Temperature : Working Humidity : Package Dimensions : |
0-50°F ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |