Hydro-X System Connections

Overview

The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. TrolMaster's TSS-2 has a male and female end and can extend the distance between 2 sensors (or distance between WD-1 module and the sensor).

Features

• Seamless Connection with Water Detector
• Plug & Play

Specifications

Package Contents

• 1 x 16ft Extension Cable

Overview

TrolMaster's BM-1 weatherproof box is designed to provide protection for the TrolMaster TS-1/2 (Thermostat Stations), HS-1 (Humidistat Station) and ARS-1 (AC Remote Station for the Hydro-X System) controllers from dripping water and low-pressure sprayed water.

Overview

TrolMaster's MC-1 Multifunction Crimper and Cable Tester is a premium-quality, all-in-one crimp tool, network cable tester, wire stripper and cutter. Network professionals can easily terminate and test network cables for wiring continuity, open configurations, shorts and mis-wires.

The MC-1 is an excellent addition to any network toolbox. This crimping tool and cable tester can quickly check terminations before IT staff install the customized cable. It also allows for quick identification and repair of connection problems in an existing installation.

Features

• All-in-one professional modular crimping tool with cutting, stripping and cable-testing functions
• Compatible with RJ45, RJ11, RJ12 and RJ22 plugs
• Cuts, strips, terminates and tests with one tool
• Tests patch cables and installed wiring
• Ratchet function

Specifications

Overview

The TrolMaster ECW-1 RJ12 Waterproof Straight-Through Inline Coupler (2-Pack) is designed to extend the connection between two RJ12 cables, its sealed waterproof connectors prevents water intrusion, thus maintaining a long-lasting and stable connection with high performance between controller, sensors and devices.

Features

• IP68
  

Specifications

Package Contents

RJ12 Waterproof Straight-Through Inline Coupler (2 Packs) 

Overview

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.

Package Contents

• 1 x Male-to-Male 16ft RJ12 Cable
• 1 x Male-to-Male 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

Overview

TrolMaster's ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 to Female Barrel cable. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled is wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.

Package Contents

• 1 x 16ft Male-to-Male RJ12 Cable
• 1 x 4ft RJ12 to Female Barrel Cable 
• 1 x RJ12 T-Splitter

Overview

TrolMaster's ECS-3 provides a 5/8” diameter connector for some Fluence brand LED fixtures use Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable.

Package Contents

• 1x 16ft Male-to-Male RJ12 Cable
• 1x 4ft Rj12 to 3 pins IP67 converter Cable 
• 1x RJ12 T-Splitter

Overview

TrolMaster's ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main controller.

Specifications

Overview

TrolMaster's ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.

Specifications

Overview

TrolMaster's ECS-5 provides a 5/8" diameter connector for some Fluence brand newer LED fixtures use PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

Package Contents

• 1 x 16 ft RJ12 Cable
• 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable
• 1 x T-shaped Splitter

Specifications

Overview

TrolMaster's ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1.

Package Contents

1 x ECS-8 32ft Extension Cable

Overview

The ECS-10 is a 25′ coiled RJ12 communication cable. It comes with a 15′ coiled cable with 5′ straight cables on each end. When connecting fixtures that are installed on a lifting system or movable vertical racking, you can use the RJ12 coiled communication cable ECS-10 to allow the fixtures to be mobile and to be moved freely.

Package Contents

RJ12 coiled communication cable x1