(MBS-TH) Replacement Part 3-in-1 Temp/Humid/Light Sensor for Hydro-X
Prix régulier €82,95 Épargnez €-82,95
TrolMaster's MBS-TH is a 3-in-1 Temp/Humid/Light sensor for the Hydro-X system.
Note: This is a replacement or spare part. The main controller comes with a sensor already.
Output Voltage: Maximum Current: Working Temperature : Working Humidity : Packaging Dimensions: |
0~11.5V 0.2A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |
(MBS-PAR) Full Spectrum Quantum Sensor
Prix régulier €488,25 Épargnez €-488,25TrolMaster's Full Spectrum Quantum Sensor (MBS-PAR) provides the accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements.
Used in conjunction with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact lighting level (in PPFD) that the user selects.
Working Temperature : Working Humidity : Package Dimensions : |
0-50°C ≤90% 16cm(L) x 5.6cm(W) x 8.6cm(H) |
(MBS-SD) Smoke Detector for Hydro-X
Prix régulier €60,90 Épargnez €-60,90TrolMaster's Smoke Detector (MBS-SD) will alert you to smoke within your growing area. You can connect up to 5 MBS-SD to a single Hydro-x (HCS-1) controller. You will receive a user-alert on your phone if any of your MBS-SD determine that there is smoke in the environment. This way you can be aware of the potential problem before it gets out of hand.
MBS-SD sensors should remain dry and clean to prevent premature failure.
Do not spray foreign substances or allow water / condensate on the sensors.
Comes with a cable set.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°F ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |
(MBS-S8) CO2 Sensor for Hydro-X
Prix régulier €233,10 Épargnez €-233,10TrolMaster's optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
Comes with a cable set.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions: |
0~11.5V 0.2A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |