
(TLB-1) 4' LED bar with 4x Spectrum channels (White+ Deep Red+ Far Red+ UV) for Model One LED system
Regular price €71,40 Save €-71,40Overview
4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>234 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-1 LED Bar

(TLB-2) 5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System
Regular price €78,75 Save €-78,75Overview
5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 5' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>252 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-2 LED Bar

(DR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System
Regular price €50,40 Save €-50,40Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Deep Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x DR-1 LED Bar

(FR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED system
Regular price €54,60 Save €-54,60Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Far Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x FR-1 LED Bar

(TLD-2) 90 Watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels
Regular price €54,60 Save €-54,60Overview
The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.
*The light bar and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Two Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels

(TLD-4) 90 Watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels
Regular price €60,90 Save €-60,90Overview
The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.
*Light bars and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Four Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels




(TDC-240) 7ft Splitter Power Cord for Model One LED System
Regular price €18,90 Save €-0,90Overview
This AWG #18 splitter power is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-120 / 240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
Input Voltage: 240VAC, 50/60Hz
Length: 7' (213,3 cm)
Amp: 10A
Package Content
-
1x 7ft Splitter Power Cord for Model One LED System AWG#18

(TDC-2) 1ft AWG #18 Daisy Chain Cord for Model One LED system
Regular price €12,60 Save €-12,60Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 1' 10A |
Package Content
-
1x 1ft AWG #18 Daisy Chain Cord for Model One LED system

(TDC-3) 2ft AWG #18 Daisy Chain Cord for Model One LED system
Regular price €14,70 Save €-14,70Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 2' 10A |
Package Content
-
1x 2ft AWG #18 Daisy Chain Cord for Model One LED system

(TDC-4) 5ft AWG #18 Daisy Chain Cord for Model One LED system
Regular price €16,80 Save €-16,80Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 5' 10A |
Package Content
-
1x 5ft AWG #18 Daisy Chain Cord for Model One LED system

(ICL-300) 4' Inner Canopy LED Bar with Built-in 120 Watt Driver
Regular price €225,75 Save €-225,75Overview
The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area.
*Power cord and stand are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Auto-sensing 100~277 VAC
- 3-side LED surface
- 300° Lighting coverage
- 4' LED with Four Spectrum
Specifications
PPF: Input Power: Input Voltage: Lifetime: |
>314 umol/s 120W Autosensing 100~277 VAC L90:> 54,000 hrs |
Package Content
- 1x Inner Canopy LED bar
- 2x mounting hooks
- 2x adjustment knobs








(LMA-G) Group Control Adapter
Regular price €95,55 Save €-95,55Overview
TrolMaster's LMA-G is specially designed to be used with ThinkGrow single-bar fixtures, i.e. Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G. It needs to be connected inline with the LMA-T lighting control adapter to activate the group control function. Up to 10 groups of lights can be created, each with individual settings.
Features
- Designed for ThinkGrow Single-bar LED fixtures
- LCD Display for Group addressing
- Seamless Connection with Hydro-X Pro and LMT-T Lighting Adaptor with RJ12 Cable
- Plug & Play
Specifications
Input Voltage: Maximum Current: Working Temperature : Working Humidity : Package Dimensions : G.W. per pack : |
12V 0.1A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) 0.06 kgs |

(TDC-1) AWG #18 Splitter Power Cord for Model One LED system
Regular price €15,75 Save €-15,75Overview
This AWG #18 splitter power cord is specially designed for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 15cm/ 5.9" 10A |
Package Content
-
1x Splitter Power Cord for Model One System AWG#18

(TSD-1) ThinkGrow LED Stand for ICL-300 (Single Unit)
Regular price €26,25 Save €-26,25Overview
The TSD-1 is a single unit stand designed specifically for use with the ICL-300 (Inner Canopy LED bar). It’s an essential component for any grower’s setup looking to stabilize their inner canopy lights at even levels.
How it Works: Each ICL-300 unit should be supported by 2x TSD-1 stands. With every pair of TSD-1 stands, you can hold 1-2 columns of ICL-300.
It is always suggested to use at least 2 TSD-1 stands in conjunction with the ICL-300. However, when arranging a line of several ICL-300 LED bars, the row can be conveniently expanded by positioning additional TSD-1 between the ICL-300 bars.
Users can apply up to 2 columns of LED bars in the row if needed
Suggested Setup: For a setup consisting of 12x ICL-300, you would require 13x TSD-1 stands. This ensures optimal stability and functionality of your canopy lights.
Features
- Compatible with ICL-300
- Adjustable height
Package Contents
- 4x Stand Legs
- 2x Aluminium Tubes
- 1x M38 Screw Set
- 1x Dustproof Plug