(TLB-2) 5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System
Prezzo regolare €55,00 Risparmia €-55,005' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
PPF: Input Power: Mounting Height: Lifetime: |
>252 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
(TLD-2) 90 Watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels
Prezzo regolare €45,00 Risparmia €-45,00The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.
*The light bar and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
(TLD-4) 90 Watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels
Prezzo regolare €60,00 Risparmia €-60,00The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.
*Light bars and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
(TS-1) Stazione termostato per sistema Hydro-X
Prezzo regolare €110,25 Risparmia €-110,25La stazione termostato TS-1 di TrolMaster è progettata per sostituire un termostato collegato a un'unità HVAC convenzionale di solo raffreddamento. Il TS-1 è collegato al sistema HVAC utilizzando lo stesso cavo del termostato a bassa tensione e dispone del cablaggio codificato a colori standard della maggior parte dei termostati. Hydro-x consente impostazioni diurne e notturne separate per ciascuno dei (4) moduli TS in modo che più sistemi HVAC possano essere controllati da un singolo sistema Hydro-X.
Temperatura di lavoro : Umidità di lavoro: Dimensioni imballo: GW per confezione: |
0-50°C ≤90% 8,5 cm (lunghezza) x 16 cm (larghezza) x 8,5 cm (altezza) 0,40 kg |
(TS-2) Stazione termostato per sistema Hydro-X
Prezzo regolare €128,63 Risparmia €-128,63
La stazione termostato TS-2 di TrolMaster è progettata per sostituire un termostato collegato a un'unità HVAC standard. Il TS-2 può essere utilizzato per controllare la maggior parte dei sistemi HVAC, comprese le pompe di calore e i sistemi HVAC multistadio. Il TS-2 è collegato al sistema HVAC utilizzando lo stesso cavo del termostato a bassa tensione e dispone del cablaggio codificato a colori standard della maggior parte dei termostati. Hydro-x consente impostazioni diurne e notturne separate per ciascuno dei (4) moduli TS, in modo che più sistemi HVAC possano essere controllati da un singolo sistema Hydro-X. Il TS-2 dispone inoltre di un tempo di ritardo regolabile per l'attivazione di ciascun sistema HVAC. Ciò riduce al minimo gli avviamenti elevati (corrente di spunto) e consente di controllare in sicurezza fino a 4 sistemi HVAC.
Tensione di uscita: Corrente massima: Temperatura di lavoro : Umidità di lavoro: Dimensioni imballo: |
24 V 1A 0-50°C ≤90% 16 cm (lunghezza) x 8,6 cm (larghezza) x 8,6 cm (altezza) |
(TSB-1) Staffa per sensore TrolMaster (2 confezioni)
Prezzo regolare €16,80 Risparmia €-16,80La staffa per sensore TrolMaster TSB-1 è un supporto a parete appositamente progettato per MBS-K30 / MBS-PRO. Gli utenti possono montare il sensore MBS a parete. Rimani spensierato grazie al design con bordi curvi che si adatta perfettamente ai sensori MBS ed è saldamente bloccato.
Temperatura di lavoro : Umidità di lavoro: Dimensioni della confezione: |
0-50°C ≤ 90% 8,5 cm (lunghezza) x 6,8 cm (larghezza) x 6,7 cm (altezza) |
(TSD-1) ThinkGrow LED Stand for ICL-300 (Single Unit)
Prezzo regolare €20,00 Risparmia €-20,00The TSD-1 is a single unit stand designed specifically for use with the ICL-300 (Inner Canopy LED bar). It’s an essential component for any grower’s setup looking to stabilize their inner canopy lights at even levels.
How it Works: Each ICL-300 unit should be supported by 2x TSD-1 stands. With every pair of TSD-1 stands, you can hold 1-2 columns of ICL-300.
It is always suggested to use at least 2 TSD-1 stands in conjunction with the ICL-300. However, when arranging a line of several ICL-300 LED bars, the row can be conveniently expanded by positioning additional TSD-1 between the ICL-300 bars.
Users can apply up to 2 columns of LED bars in the row if needed
Suggested Setup: For a setup consisting of 12x ICL-300, you would require 13x TSD-1 stands. This ensures optimal stability and functionality of your canopy lights.
(TSH-1) Stazione di temperatura/umidità
Prezzo regolare €128,63 Risparmia €-128,63La stazione di temperatura/umidità TSH-1 di TrolMaster è una stazione di controllo con uscita analogica da 0-10 volt che funziona con i controller HCS-1 e HCS-2. Il TSH-1 può essere configurato per controllare un dispositivo di temperatura o umidità che richiede un segnale di ingresso variabile da 0-10 volt.
Il TSH-1 è in grado di controllare ventole, prese d'aria o qualsiasi altro dispositivo a velocità variabile che accetta un ingresso da 0-10 volt. È dotato di impostazioni separate di velocità "minima" diurna e notturna integrate nel TSH-1, nonché di setpoint giorno/notte separati accessibili tramite il controller HCS.
Tensione di uscita: Corrente massima: Temperatura di lavoro : Umidità di lavoro: Dimensioni imballo: |
0-10 V 1A 0-50°F ≤ 90% 16 cm (lunghezza) x 8,6 cm (larghezza) x 8,6 cm (altezza) |
1 x stazione di temperatura/umidità (TSH-1)
1 cavo RJ12 da 16 piedi
1 cavo RJ12 da 4 piedi
1 divisore a T RJ12
(TSS-1) Set touch spot per il sistema Aqua-X
Prezzo regolare €34,65 Risparmia €-34,65È possibile aggiungere un ulteriore rilevatore al WD-1 utilizzando il set TSS-1/splitter a T e rilevatore di acqua (sensore). Il TSS-1 di TrolMaster viene fornito con uno splitter a T e un rilevatore d'acqua aggiuntivo per avere più punti per rilevare l'acqua utilizzando un singolo modulo WD-1. Ciò è utile quando si tenta di monitorare eventuali fuoriuscite d'acqua o inondazioni o per monitorare il deflusso dell'acqua in più posizioni.
Per l'orticoltura, l'idroponica e altro ancora.
Temperatura di lavoro : Umidità di lavoro: Dimensioni della confezione: |
0-50°F ≤90% 15,6 cm (lunghezza) x 8,3 cm (larghezza) x 3 cm (altezza) |
(TSS-2) Cavo di prolunga Touch Spot per sistema Aqua-X
Prezzo regolare €17,33 Risparmia €-17,33Il cavo di prolunga TSS-2 è semplicemente un cavo di prolunga da 16 piedi da utilizzare con i rilevatori d'acqua WD-1 . Il TSS-2 di TrolMaster ha un'estremità maschio e una femmina e può estendere la distanza tra 2 sensori (o la distanza tra il modulo WD-1 e il sensore).
Temperatura di lavoro : Umidità di lavoro: Dimensioni della confezione: |
0-50°F ≤90% 15,6 cm (lunghezza) x 8,3 cm (larghezza) x 3 cm (altezza) |
(UH-1) Gancio ThinkGrow Unitstrut
Prezzo regolare €26,25 Risparmia €-26,25Il gancio Unistrut UH-1 è progettato per i LED ThinkGrow modello H / modello W / modello V.
UN
Dimensioni del prodotto: 13,8 cm (L) x 17 cm (L) x 2,5 cm (A)
(UH-2) Gancio ThinkGrow Unitstrut
Prezzo regolare €26,25 Risparmia €-26,25Il gancio Unistrut UH-2 è progettato per i LED ThinkGrow Modello I e Modello I Plus .
Dimensioni del prodotto: 17(L)*9(L)*0,54(A) cm
(V-10) 10 Inch Inline Duct Ventilation Fan
Prezzo regolare €293,00 Risparmia €-293,00The 10-inch Inline Duct Ventilation Fan is a compact and efficient fan designed to improve air circulation and ventilation in indoor spaces. With its powerful motor, it moves a significant volume of air, removing stale air, and humidity. Its versatile design allows easy installation in various duct systems, ensuring a fresh and comfortable environment. Ideal for the grow room settings, this fan is a reliable solution for maintaining optimal indoor air quality.
Operating Voltage: Rated Current: Rated Input Power: No of Blades: Max Air Flow: Max Static Air Pressure: Rotating Direction: Operating Temperature: Mean Time to Failure: IP Rating: Product Dimensions: Net Weight: |
100-277VAC, 50/60Hz 2.7A Max 268W Max 10 971 cfm 956 Pa CCW -4~140°F 50000H (25°C) IP44 15.31" x 11.26" x 9.70" 6.50 kg |
(V-10M) 10 Inch Metal Inline Duct Ventilation Fan Pro Model
Prezzo regolare €319,20 Risparmia €-319,20The 10-inch Metal Inline Duct Ventilation Fan Pro Model is a compact and efficient device designed to enhance air circulation and ventilation in indoor spaces. With its powerful motor, it moves a substantial volume of air, effectively removing stale air and humidity. Its versatile design facilitates easy installation in various duct systems, ensuring a fresh and comfortable environment. Ideal for grow room settings, this fan is a dependable solution for maintaining optimal indoor air quality.
Voltage Range (VAC) : | 100~277 |
Rated Power (W) : | 210 |
Max. airflow(cfm) : | 1014 |
Max. static air pressure | 770Pa |
Number of blades: | 7 |
Connection Diameter | Φ250mm / 9.84 inch |
Overall dimensions (mm): |
300*315*Φ265 |
Warranty : | 3 Years Standard Warranty |
(V-12) 12 Inch Inline Duct Ventilation Fan
Prezzo regolare €389,00 Risparmia €-389,00The 12-inch Inline Duct Ventilation Fan is a compact and efficient fan designed to improve air circulation and ventilation in indoor spaces. With its powerful motor, it moves a significant volume of air, removing stale air, and humidity. Its versatile design allows easy installation in various duct systems, ensuring a fresh and comfortable environment. Ideal for the grow room settings, this fan is a reliable solution for maintaining optimal indoor air quality.
Operating Voltage: Rated Current: Rated Input Power: No of Blades: Max Air Flow: Max Static Air Pressure: Rotating Direction: Operating Temperature: Mean Time to Failure: IP Rating: Product Dimensions: Net Weight: |
100-277VAC, 50/60Hz 2.6A Max 268W Max 8 1180 cfm 779 Pa CCW -4~140°F 50000H (25°C) IP44 15.31" x 11.26" x 9.70" 6.50 kg |
(V-12M) 12 Inch Metal Inline Duct Ventilation Fan Pro Model
Prezzo regolare €419,00 Risparmia €-419,00The 12-inch Metal Inline Duct Ventilation Fan is a compact and efficient fan designed to improve air circulation and ventilation in indoor spaces. With its powerful motor, it moves a significant volume of air, removing stale air, and humidity. Its versatile design allows easy installation in various duct systems, ensuring a fresh and comfortable environment. Ideal for the grow room settings, this fan is a reliable solution for maintaining optimal indoor air quality.
Voltage Range (VAC) : | 100~277 |
Rated Power (W) : | 340 |
Maximum noise level (dB) : |
74 |
Air speed (m/s) : | 18.53 |
Airflow (m³/h) : | 2600 |
Maximum rotational speed (r/min) : |
3000±10% |
Overall dimensions (mm): |
255*323*Φ300 |
Number of blades: | 7 |
Energy efficiency ratio (EER) | 7.65 |
Warranty : | 3 Years Standard Warranty |
(V-8) 8 Inch Inline Duct Ventilation Fan
Prezzo regolare €209,00 Risparmia €-209,00The 8-inch Inline Duct Ventilation Fan is a compact and efficient fan designed to improve air circulation and ventilation in indoor spaces. With its powerful motor, it moves a significant volume of air, removing stale air, and humidity. Its versatile design allows easy installation in various duct systems, ensuring a fresh and comfortable environment. Ideal for the grow room settings, this fan is a reliable solution for maintaining optimal indoor air quality.
Operating Voltage: Rated Current: Rated Input Power: No of Blades: Max Air Flow: Max Static Air Pressure: Rotating Direction: Operating Temperature: Mean Time to Failure: IP Rating: Product Dimensions: Net Weight: |
100-277VAC, 50/60Hz 1.8A Max 182W Max 10 684 cfm 735 Pa CCW -4~140°F 50000H (25°C) IP44 12.09" x 9.57" x 7.80" 3.1 kg |
(VFD-1) Stazione VFD per il controllo della velocità della ventola VFD nel sistema Hydro-X Pro
Prezzo regolare €128,63 Risparmia €-128,63L'azionamento a frequenza variabile VFD-1 di TrolMaster è progettato specificamente per controllare gli inverter tra cui TECO E510, DELTA ME300, ABB ACS355 (con un modulo FMBA-01) ecc. con il controller Hydro-X Pro allo scopo di controllare e regolare la velocità degli impianti industriali fan nella tua applicazione.
Non è necessario fornire alimentazione all'unità VFD-1. Può essere collegato all'Hydro-X Pro con un semplice cavo telefonico RJ12.
12 V CC/0,2 A, 0~50 ° C, <90% UR
(WCS-1) Sensore del contenuto d'acqua per il sistema Aqua-X
Prezzo regolare €241,50 Risparmia €-241,50Il sensore del contenuto d'acqua WCS-1 di TrolMaster consente all'utente di monitorare la percentuale di acqua/nutrienti all'interno del terreno di coltura. Il livello di umidità/contenuto d'acqua viene visualizzato in tempo reale sul modulo WCS stesso, su Aqua-x (o Hydro-X Pro ) e sull'APP. Tali dati vengono visualizzati su un grafico (tramite l'APP) e aiutano l'utente a visualizzare il tempo di asciugatura e ad apportare modifiche ai timer di irrigazione/cicli di irrigazione.
È possibile collegare fino a 8 WCS-1 a un singolo Aqua-x. Quando più WCS-1 sono collegati a un singolo Aqua-X, il valore visualizzato su Aqua-x e sull'APP sarà la MEDIA di tutti i sensori.
* WCS-1 può essere utilizzato solo con Aqua-X (NFS-1) e Hydro-X Pro (HCS-2).
Tensione di ingresso : Corrente di ingresso massima: Temperatura di lavoro : Umidità di lavoro: Campo di misura : Dimensioni imballo: |
12 VCC 0,1 A 0-50°C ≤90% 0~100% 27,5 cm (lunghezza) x 16,4 cm (larghezza) x 6,2 cm (altezza) |