
(TDC-4) 5ft AWG #18 Daisy Chain Cord for Model One LED system
Prezzo regolare €16,80 Risparmia €-16,80Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 5' 10A |
Package Content
-
1x 5ft AWG #18 Daisy Chain Cord for Model One LED system




(TDC-240) 7ft Splitter Power Cord for Model One LED System
Prezzo regolare €18,90 Risparmia €-0,90Overview
This AWG #18 splitter power is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-120 / 240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
Input Voltage: 240VAC, 50/60Hz
Length: 7' (213,3 cm)
Amp: 10A
Package Content
-
1x 7ft Splitter Power Cord for Model One LED System AWG#18

(TDC-2) 1ft AWG #18 Daisy Chain Cord for Model One LED system
Prezzo regolare €12,60 Risparmia €-12,60Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 1' 10A |
Package Content
-
1x 1ft AWG #18 Daisy Chain Cord for Model One LED system

(ICL-300) 4' Inner Canopy LED Bar with Built-in 120 Watt Driver
Prezzo regolare €225,75 Risparmia €-225,75Overview
The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area.
*Power cord and stand are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Auto-sensing 100~277 VAC
- 3-side LED surface
- 300° Lighting coverage
- 4' LED with Four Spectrum
Specifications
PPF: Input Power: Input Voltage: Lifetime: |
>314 umol/s 120W Autosensing 100~277 VAC L90:> 54,000 hrs |
Package Content
- 1x Inner Canopy LED bar
- 2x mounting hooks
- 2x adjustment knobs

(TDC-3) 2ft AWG #18 Daisy Chain Cord for Model One LED system
Prezzo regolare €14,70 Risparmia €-14,70Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 2' 10A |
Package Content
-
1x 2ft AWG #18 Daisy Chain Cord for Model One LED system

(TLD-4) 90 Watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels
Prezzo regolare €60,90 Risparmia €-60,90Overview
The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.
*Light bars and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Four Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels

(TLB-1) 4' LED bar with 4x Spectrum channels (White+ Deep Red+ Far Red+ UV) for Model One LED system
Prezzo regolare €71,40 Risparmia €-71,40Overview
4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>234 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-1 LED Bar

(TDC-1) AWG #18 Splitter Power Cord for Model One LED system
Prezzo regolare €15,75 Risparmia €-15,75Overview
This AWG #18 splitter power cord is specially designed for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 15cm/ 5.9" 10A |
Package Content
-
1x Splitter Power Cord for Model One System AWG#18








(LMA-T) Adattatore di illuminazione-T per sistema Hydro-X
Prezzo regolare €95,55 Risparmia €-95,55Panoramica
Il sistema Hydro-x di TrolMaster è in grado di controllare la maggior parte degli apparecchi di illuminazione supplementari venduti oggi. La maggior parte dei produttori di luci offre la possibilità di controllare i propri sistemi di illuminazione utilizzando il cosiddetto controllo a bassa tensione. Il controllo a bassa tensione può assumere molte forme e protocolli di comunicazione. TrolMaster produce diversi tipi di adattatori di illuminazione (unità LMA) che consentono all'Hydro-x di controllare le luci utilizzando l'opzione di controllo a bassa tensione.
LMA-T funziona specificamente con i sistemi LED ThinkGrow per fornire un controllo a due canali, che consente il controllo separato per i livelli di uscita a spettro completo e rosso intenso sui LED ThinkGrow.
LMA-T si collega semplicemente alle porte di controllo dell'illuminazione Linea 1 e Linea 2 sull'HCS-1. Una volta connesso, l'utente può quindi impostare tempi di accensione e spegnimento individuali e le impostazioni di regolazione per i LED a spettro completo e anche per i LED rosso intenso.
L'LMA-T viene quindi collegato ai cavi di controllo dell'illuminazione di tipo RJ in cui ciascuno dei LED è ricollegato al controller in una configurazione a margherita utilizzando connessioni plug-and-play.
Un adattatore può gestire fino a 256 LED.
* Converti cavo connettore RJ12 in resistente all'acqua incluso.
Caratteristiche
- Indicatore LED
- Plug
Specifiche
Tensione di uscita: Corrente massima: Temperatura di lavoro : Umidità di lavoro: Dimensioni imballo: |
0~11,5 V 0,2 A 0-50°C ≤90% 15,6 cm (lunghezza) x 8,3 cm (larghezza) x 3 cm (altezza) |








(LMA-G) Adattatore di controllo di gruppo
Prezzo regolare €95,55 Risparmia €-95,55Panoramica
LMA-G di TrolMaster è appositamente progettato per essere utilizzato con gli apparecchi a barra singola ThinkGrow, ovvero Modello I e I Plus . LMA-G deve essere collegato a un adattatore di controllo dell'illuminazione per offrire una funzione di controllo di gruppo alle luci di coltivazione. Ogni LMA-G può controllare un gruppo di luci./Ogni gruppo di luci richiede un LMA-G. È necessario collegarlo in linea all'adattatore di controllo dell'illuminazione LMA-T per attivare la funzione di controllo di gruppo. È possibile creare fino a 10 gruppi di luci, ciascuno con impostazioni individuali.
Caratteristiche
- Progettato per apparecchi LED ThinkGrow a barra singola
- Display LCD per indirizzamento di gruppo
- Connessione perfetta con Hydro-X Pro e adattatore di illuminazione LMT-T con cavo RJ12
- Plug
Specifiche
Tensione di ingresso: Corrente massima: Temperatura di lavoro : Umidità di lavoro: Dimensioni della confezione: GW per confezione: |
12V 0,1 A 0-50°C ≤90% 15,6 cm (lunghezza) x 8,3 cm (larghezza) x 3 cm (altezza) 0,06 kg |

(RC-1) Kit cavi per sollevamento sollevatore
Prezzo regolare €48,30 Risparmia €-48,30Panoramica
Il kit cavi Lifter Rigging (RC-1) è un cavo di rigging di alta qualità progettato specificamente per l'uso con il sistema ThinkGrow Smart Light Lifter. Questo kit di cavi è costruito per sopportare il peso delle luci di coltivazione ed è in grado di sollevare fino a 120 kg se utilizzato con altri cavi RC-1. Con il kit cavi Lifter Rigging, puoi regolare facilmente l'altezza delle luci di coltivazione per ottimizzare la crescita delle tue piante e rendere la manutenzione un gioco da ragazzi.
Specifiche
Lunghezza del cavo: Dimensioni dell'imballaggio: Peso lordo: |
1,2 m per lato 170 mm(L) x 90 mm(L) x 54 mm(A) 0,48 kg |
Contenuto del pacco
- 1 cavo di sollevamento per sollevatore
- 2 piastre per occhi in acciaio inossidabile








(Modello H Plus) Lampada da coltivazione a LED per orticoltura ThinkGrow
Prezzo regolare €1.573,95 Risparmia €-1.573,95Panoramica
Il modello H Plus è una vera lampada da coltivazione a LED larga 5' progettata per essere utilizzata in stanze di coltivazione indoor per pratiche di coltivazione con PPFD elevato nell'agricoltura verticale. L'apparecchio ha un totale di 3368 diodi top-bin altamente efficienti con una potenza totale aggiornata a 720 watt, con un conseguente aumento PPF del 18% nelle prestazioni. Gli utenti possono avere l'attenuazione integrata o regolare lo spettro e l'intensità della luce collegando gli apparecchi con un controller. Quattro canali di spettro tra cui UV, bianco (spettro completo), rosso intenso e rosso lontano sono completamente controllabili per personalizzare lo spettro/ricetta di luce desiderata di cui le tue piante hanno bisogno. (Disponibile solo su TrolMaster HCS-2/3). Il design brevettato della barra luminosa plug-and-play offre inoltre facilità di installazione e facilita la manutenzione futura.
* Per funzionare con il controller Hydro-X è necessario l'adattatore di illuminazione TrolMaster T (LMA-T).
* Viene fornito con un cavo di alimentazione standard da 240 V.
Sconti sui volumi ThinkGrow LED
Si prega di notare la spedizione internazionale: è richiesto un ordine minimo di 20 luci per la spedizione internazionale. La spedizione verrà effettuata tramite nave cargo. Si applicano tariffe di carico.
Spedizione gratuita nei 48 stati inferiori: se ti trovi in altri stati, chiama lo store al numero 707.710.0016 per ricevere un preventivo di spedizione.
Invia un'e-mail a sales@mangotech.store per ottenere un prezzo in base alla nostra tabella di acquisto all'ingrosso.
Caratteristiche
- Dispositivo di larghezza reale da 5' per coprire rack di coltivazione da 5'
- Efficienza eccezionale a 2,8 μmol/J
- Controllo definitivo su 4 canali di spettro indipendenti (Deep Red, UV, White, Far Red)
- Il design brevettato della barra luminosa Plug and Play
- Dimming integrato per una maggiore comodità
- Controllabilità esterna con 256 apparecchi per canale
- Controllo del gruppo di spettro: fino a 10 gruppi
Contenuto del pacco
-
1 driver per luce LED
- 8 barre luminose a LED larghe 5'
- 1x cavo di alimentazione da 12' 240 V
- 1x cavo di prolunga impermeabile da 16 piedi a 4 pin
- 2x ganci per driver LED
Specifiche
PPF: | > 2016 μmol/s |
Efficacia: | > 2,8 μmol/J |
Potenza di ingresso : | 720 W |
BTU: | 2456,74 BTU/H |
Fattore di potenza : | ≥ 96% |
Dimensioni dell'apparecchio: | 57"L x 44,6"L x 4,44"A |
Peso dell'apparecchio: | 41,8 libbre |
Altezza di montaggio: | > 6" (15,2 cm) sopra il tettuccio |
Tutta la vita : | L90 >54.000 ore |
Garanzia : | 5 anni di garanzia standard |
Tensione di ingresso : | Rilevamento automatico 100-277 V |
Assorbimento dell'amplificatore: | 220 V/6,23 A, 240 V/3,09 A, 277 V/2,71 A |
Certificazioni: | ETL, IP56 |
Lunghezza della corda : | 10,5 piedi |




(LRC-1) Telecomando per sollevatore intelligente
Prezzo regolare €124,95 Risparmia €-124,95Panoramica
Il telecomando Smart Lifter LRC-1 è progettato per essere utilizzato con i sollevatori Smart Light LLT-1. La sua funzione plug & play consente agli utenti di installare e utilizzare facilmente i sollevatori di luce a distanza e di programmare i limiti di portata massimo e minimo dei sollevatori di luce LLT-1. Il semplice funzionamento manuale su e giù viene eseguito utilizzando due pulsanti sull'LRC-1.
Il telecomando del sollevatore LRC-1 può anche essere collegato all'Hydro-X Pro per funzionalità avanzate come il controllo del gruppo di sollevamento e altro ancora.
Specifiche
Tensione di ingresso: Amperaggio: Temperatura di lavoro: Umidità di lavoro: Dimensioni dell'imballaggio: Peso lordo: |
220-240 V, 50/60 Hz 0,1 A 0-40°C ≤ 90% 13 cm (L) x 18,7 cm (L) x 8,8 cm (A) 0,6 kg |
Contenuto del pacco
- 1 telecomando ThinkGrow Smart Light (LRC-1)
- 1 cavo di segnale ECS-9






(LLT-1) Sollevatore di luce intelligente ThinkGrow
Prezzo regolare €576,45 Risparmia €-576,45Panoramica
Il sollevatore di luce LLT-1 fa parte del sistema di sollevamento di luce modulare ThinkGrow. Il suo funzionamento multi-sollevatore sincronizzato all'avanguardia offre agli utenti un sistema personalizzabile, espandibile e facile da installare. Il sollevatore è certificato ETL e il cavo può sollevare fino a 132 libbre, 8,8 piedi.
Il design del sollevatore leggero consente una facile installazione da parte di due persone. A differenza del tradizionale complicato sistema di sollevamento in cui sono necessari calcoli precisi e squadre di ingegneri, LLT-1 riduce i tempi di assemblaggio e la manodopera senza compromettere la qualità o la sicurezza. Il sistema di sollevamento modulare facilmente espandibile offre la massima flessibilità e personalizzazione da parte dell'utente.
Il sistema di illuminazione può anche connettersi al sistema di controllo Hydro-X Pro per funzionalità aggiuntive. LLT-1 può sollevare e abbassare più luci e collegarsi ad altri sollevatori LLT-1 tramite cavi dati a margherita, consentendo agli utenti di collegare, controllare e programmare il funzionamento sincronizzato su più sollevatori di luci, da un unico controller.
Specifiche
Tensione di ingresso: Potenza di ingresso: Temperatura di lavoro: Umidità di lavoro: Gamma di sollevamento: Peso massimo di sollevamento: Dimensioni dell'imballaggio: Peso lordo: |
220-240 V, 50/60 Hz ≤100W 0-40°C ≤90% ≤ 8,8 piedi/2,7 m/106 pollici ≤ 132 libbre/60 kg 57,2 cm (L) x 26,5 cm (L) x 19,5 cm (A) 10,38 kg |
Contenuto del pacco
- 1 sollevatore di luce intelligente ThinkGrow (LLT-1)
- 1 cavo di alimentazione
- 1 cavo di segnale
- Afrikaans
- Albanian
- Amharic
- Arabic
- Armenian
- Azerbaijani
- Bengali
- Bulgarian
- Catalan
- Croatian
- Czech
- Danish
- Olandese
- Inglese
- Estone
- finlandese
- francese
- Tedesco
- greco
- Gujarati
- Creolo haitiano
- ebraico
- hindi
- ungherese
- islandese
- indonesiano
- Italiano
- giapponese
- Kannada
- Kazakistan
- Khmer
- coreano
- Curdo (Kurmanji)
- Laotiano
- lettone
- lituano
- malgascio
- malese
- Malayalam
- maltese
- Maori
- Marathi
- Myanmar (birmano)
- nepalese
- norvegese
- Pashtu
- persiano
- Polacco
- portoghese
- Punjabi
- rumeno
- russo
- Samoano
- Cinese semplificato
- slovacco
- sloveno
- spagnolo
- svedese
- Tamil
- Telugu
- tailandese
- Cinese tradizionale
- Turco
- ucraino
- Urdu
- vietnamita
- gallese

(TLD-2) 90 Watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels
Prezzo regolare €54,60 Risparmia €-54,60Overview
The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.
*The light bar and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Two Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels

(TLB-2) 5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System
Prezzo regolare €78,75 Risparmia €-78,75Overview
5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 5' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>252 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-2 LED Bar

(FR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED system
Prezzo regolare €54,60 Risparmia €-54,60Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Far Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x FR-1 LED Bar

(DR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System
Prezzo regolare €50,40 Risparmia €-50,40Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Deep Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x DR-1 LED Bar

(UH-2) Gancio ThinkGrow Unitstrut
Prezzo regolare €26,25 Risparmia €-26,25Panoramica
Il gancio Unistrut UH-2 è progettato per i LED ThinkGrow Modello I e Modello I Plus .
Specifiche
Dimensioni del prodotto: 17(L)*9(L)*0,54(A) cm






(UH-1) Gancio ThinkGrow Unitstrut
Prezzo regolare €26,25 Risparmia €-26,25Panoramica
Il gancio Unistrut UH-1 è progettato per i LED ThinkGrow modello H / modello W / modello V.
UN
Specifiche
Dimensioni del prodotto: 13,8 cm (L) x 17 cm (L) x 2,5 cm (A)






(OPA-1) Scatola di giunzione intelligente
Prezzo regolare €208,95 Risparmia €-208,95Panoramica
La ThinkGrow Smart Junction Box è un interruttore automatico elettronico e un contatore di energia collegato in linea con ciascuna "stringa" di LED per monitorare e proteggere il circuito dal sovraccarico di corrente. Se il protettore del circuito rileva un amperaggio insolitamente elevato, l'alimentazione ai LED verrà disattivata per evitare danni ai LED e al sistema di cavo di alimentazione con collegamento a margherita.
Contenuto del pacco
- Scatola di giunzione intelligente (OPA-1) x 1
- Guarnizione pressacavo impermeabile alternativa (per cavi 12/3 e 14/3) x 1
Caratteristiche
- Protezione da sovracorrente
- Protezione contro le sovratensioni
- Raccolta dati sul consumo energetico
- Monitoraggio in loco
- Registrazione wireless dei dati di alimentazione (con Hydro-X Pro)
Specifiche
Potenza di ingresso : Tensione nominale: Corrente nominale: Intervallo del punto di spegnimento: Punto di protezione da sovracorrente: Sensibilità alla protezione: Precisione della tensione: Precisione attuale: Precisione della potenza: Precisione PF: Temperatura di esercizio: Umidità di lavoro: Dimensioni del prodotto : GW per confezione: Certificazioni: ID FCC: |
00~277 VCA, 50/60 Hz 220~240 V 30A 15A/20A/30A +120% Risposta entro 0,5 s ±2% letture/±1% punto di arresto ±2% letture/±1% punto di arresto ±5% letture/±1% punto di arresto ±10% 0~40°C 5~95%UR 10.405 x 26.616 x 7.077 (xm) 940 g ETL/FCC 2A33F-OPA-1 |