(DSC-2) CO2 Station (UK/EU)
Precio habitual €92,40 Guardar €-92,40The TrolMaster DSC-2 CO2 control / device module allows users to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-X and Tent-X. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2.
Comes with a cable set
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(DSD-1) Dry Contact Station for Hydro-X system
Precio habitual €82,95 Guardar €-82,95The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°FC ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |
(DSE-2E) CO2 Emergency Stop Station
Precio habitual €109,20 Guardar €-109,20TrolMaster's DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 220V controlled outlet that supplies the power to CO2 solenoid valves in normal operation. The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.
Input Voltage: Output Current: Output Voltage: Working Temperature : Working Humidity : Package Dimensions: G.W. per pack: |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤ 90% 8.5cm(L) x 8cm(W) x 9cm(H) 0.34kgs |
(DSV-1) Low-Volt Station
Precio habitual €82,95 Guardar €-82,95The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.
Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.
This allows the user to directly connect low voltage devices such as solenoids, valves, audiovisual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
Input Voltage : Output Voltage : - Working Temperature : Working Humidity : Packaging Dimensions : |
220~240VAC, 50/60Hz DC24/ AC24 0.25A DC12/ AC12 0.5A 0-50°C ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |