Tent-X System

Overview

TrolMaster's Tent-X (TCS-1) is a state-of-the-art professional-grade and modularly designed environmental and irrigation control system, designed for single-zone grow tents. Thanks to the controller's compact hydroponic capabilities, it allows the user to effectively control their tent's environmental parameters and irrigation schedule with a single control system.

It comes with a 3-in-1 temperature, humidity, and light sensor, the MBS-TH. Users can daisy-chain the MBS-TH sensor with the CO2 sensor (MBS-S8), the full spectrum quantum sensor (MBS-PAR), and the smoke and water detectors into the TCS-1's SENSOR port.

Users can also connect an AMP-3 sensor board to the Tent-X, and connect the Water content sensors (WCS-1/2) or the WD-1 water detector to the sensor board. Additionally, the TCS-1 supports the connection of up to four DS-type plug-in control models, allowing you to connect devices that can control the environment and irrigation.

The TCS-1 is the brain that unites all your climate control and irrigation devices into one being, allowing your devices to work together to create the optimal growth environment for your plants.

Features

• Grow Tent Grow Lights
  
• Climate
• Irrigation Compact Hydroponic Control System
• Modular Design & Fully Customizable
  
• Smartphone Control
• Complete Controlled Device Capacity
  
• Data Logging

Specifications

Package Contents

• 1 x Tent-X Controller
• 1 x Temp / Humid / Light 3-in-1 Sensor
• 1 x RJ12 Cable Set for Light Connection
• 1 x RJ12 T-splitter
• 1 x Power Cable

Overview

The Trolmaster's Device Station Kit is a universal 4-outlet device module kit that can be directly connected to the Tent-X controller through RJ 12 cables. It takes up 4 device modules from the controller and comes with 4 outputs that are defaulted from left to right, including DSTx1, DSHx1, and DSPx2. The power cable is directly connected to the socket, making installation quick and easy. With a total amperage of 15A, users can power multiple devices at once, each output capable of providing up to 15A.

Features

• 3-in-1 Temperature / Humidity / Timer device control station
• Up to15A total amperage loading capacity
• Plug-n-play simply installation

Specifications

TRANSLATE with x

English

Arabic	Hebrew	Polish
Bulgarian	Hindi	Portuguese
Catalan	Hmong Daw	Romanian
Chinese Simplified	Hungarian	Russian
Chinese Traditional	Indonesian	Slovak
Czech	Italian	Slovenian
Danish	Japanese	Spanish
Dutch	Klingon	Swedish
English	Korean	Thai
Estonian	Latvian	Turkish
Finnish	Lithuanian	Ukrainian
French	Malay	Urdu
German	Maltese	Vietnamese
Greek	Norwegian	Welsh
Haitian Creole	Persian

TRANSLATE with

COPY THE URL BELOW

Back

EMBED THE SNIPPET BELOW IN YOUR SITE

Enable collaborative features and customize widget: Bing Webmaster Portal

Back

Overview

The TrolMaster EFC-1 is specially designed to be used with Tent-X Control System to control the variable fan speed of the EC Fan. The EFC-1 needs to select the mode of output to control the EC Fan in PWM or 0-10V.

Each Tent-X can connect a corresponding EFC-1 for Exhaust (F1) and Intake (F2). Each Exhaust (F1)/ Intake (F2) line requires one EFC-1.

Features

• LCD Display for PWN
  
• 0-10V Mode Addressing
• Seamless Connection with Tent-X Main Controller and EC Fan
• Plug & Play

Package Contents

• 1x EC Fan Control Adapter

Overview

TrolMaster's AMP-3 Sensor Board can be used as a bridge between the sensors (pH Sensor & EC/Temp Sensor) and the Aqua-X Pro Controller. It is specially designed for the Aqua-X Pro system for hydroponics and horticulture. It can be connected to the main controller with a standard RJ12 cable. Multiple units can be connected into one system for multiple monitoring applications. The pH level, EC level and water temperature will be displayed on its LCD screen and the Aqua-X Pro master controller screen.

Features

• LCD Display for onsite monitoring
• Rj12 connection for flexible installation
• Addressing key for multiple units application

Specifications

Package Contents

• 1 x Sensor Board
• 1 x 16ft. Rj12 Cable
• 1 x 4ft. Rj12 Cable
• 1 x T-shaped Splitter

Overview

The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temperature or humidity is too high; shut off CO2 when turning on exhaust fans. There are many other examples where two conditions can be either combined or split.

The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style modules. (DSC-1, DSH-1/2, DST-1/2 and DSP-1).

Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module.

The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.

Interlock Setting

• Turn on an exhaust fan to reduce temp or humidity.
• Turn on an exhaust fan at night using a recycling timer OR when Humidity is too high

• Shut off a CO2 device when an exhaust fan is running
• Shut off lights if the temperature gets too warm within the area.

Features

• LED indicator
• Plug & Play

Package Contents

• 1x Dual Condition Adapter DCC-1

Overview

The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.

Comes with a cable set.

Features

• LCD Indicator 
• Attaching Plug
• RJ12 Cable Socket
• Address Assignment
• Plug & Play

Specifications

Overview

The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.

Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.

This allows the user to directly connect low voltage devices such as solenoids, valves, audiovisual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.

Features

• LCD Display, Easy Operation
• Seamless Connection with Hydro-X and Hydro-X Pro
• Assignable control of CO2, Humidity, Time or Temperature
• Plug Play

Specifications

Package Contents

• 1 x Low-Volt Station DSV-1
• 1 x 16ft RJ12 Cable
• 1 x 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

Overview

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.

Package Contents

• 1 x Male-to-Male 16ft RJ12 Cable
• 1 x Male-to-Male 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

Overview

The ECS-10 is a 25′ coiled RJ12 communication cable. It comes with a 15′ coiled cable with 5′ straight cables on each end. When connecting fixtures that are installed on a lifting system or movable vertical racking, you can use the RJ12 coiled communication cable ECS-10 to allow the fixtures to be mobile and to be moved freely.

Package Contents

RJ12 coiled communication cable x1

Overview

TrolMaster's ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 to Female Barrel cable. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled is wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.

Package Contents

• 1 x 16ft Male-to-Male RJ12 Cable
• 1 x 4ft RJ12 to Female Barrel Cable 
• 1 x RJ12 T-Splitter

Overview

TrolMaster's ECS-3 provides a 5/8” diameter connector for some Fluence brand LED fixtures use Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable.

Package Contents

• 1x 16ft Male-to-Male RJ12 Cable
• 1x 4ft Rj12 to 3 pins IP67 converter Cable 
• 1x RJ12 T-Splitter

Overview

TrolMaster's ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main controller.

Specifications

Overview

TrolMaster's ECS-5 provides a 5/8" diameter connector for some Fluence brand newer LED fixtures use PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

Package Contents

• 1 x 16 ft RJ12 Cable
• 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable
• 1 x T-shaped Splitter

Specifications

Overview

TrolMaster's ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.

Specifications

Overview

TrolMaster's ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1.

Package Contents

1 x ECS-8 32ft Extension Cable

Overview

TrolMaster's ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adapter T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting.

Package Contents

ECS-9 12ft RJ12 to 4-pin IP65 connecter cable

Overview

The TrolMaster ECW-1 RJ12 Waterproof Straight-Through Inline Coupler (2-Pack) is designed to extend the connection between two RJ12 cables, its sealed waterproof connectors prevents water intrusion, thus maintaining a long-lasting and stable connection with high performance between controller, sensors and devices.

Features

• IP68
  

Specifications

Package Contents

RJ12 Waterproof Straight-Through Inline Coupler (2 Packs) 

Overview

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

This Lighting Control Adapter D (LMA-11) is specially designed for controlling Phantom ballast.

Features

• LED Indicator
• Convert Digital Signal to Analog Signal
• RJ12 Cable Socket
• Plug & Play

Specifications

Overview

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

This Lighting Control Adapter D (LMA-12) is specially designed for controlling DimLux ballast.

Features

• LED Indicator
• Convert Digital Signal to Analog Signal
• RJ12 Cable Socket
• Plug & Play

Specifications

Overview

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

This Lighting Control Adapter D (LMA-13) is specially designed for controlling Sun Systems ballast.

Features

• LED Indicator
• Convert Digital Signal to Analog Signal
• RJ12 Cable Socket
• Plug & Play

Specifications

Overview

TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. 

This Lighting Control Adapter D (LMA-14) is compatible with Luxx, Grower's Choice, NanoLux, Gravita, Fluence, Bios, Scynce, 2 Wire 0-10V Dimming Meanwell Driver, and 0-10V Ballasts.

NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.

Features

• LED Indicator
• Convert Digital Signal to Analog Signal
• RJ12 Cable Socket
• Plug & Play

Specifications