(LMA-14) Lighting Control Adapter F
Precio habitual €61,16 Guardar €-61,16
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-14) is compatible with Luxx, Grower's Choice, NanoLux, Gravita, Fluence, Bios, Scynce, 2 Wire 0-10V Dimming Meanwell Driver, and 0-10V Ballasts.
NOTE: Each LMA-14 can control up to 40 HID lights or 24 LEDs. Additional LMA-14 adapters can be used with the SPH-1 to control as many lights as required.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-T) Lighting Adapter-T for Hydro-X System
Precio habitual €95,55 Guardar €-95,55TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full-spectrum and deep red output levels on the ThinkGrow LEDs.
The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the deep red LEDs.
The LMA-T then is connected to the RJ-type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.
One adaptor could run up to 256 LEDs.
* Convert RJ12 to Water Proof Connector Cable included.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-G) Group Control Adapter
Precio habitual €95,55 Guardar €-95,55TrolMaster's LMA-G is specially designed to be used with ThinkGrow single-bar fixtures, i.e. Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G. It needs to be connected inline with the LMA-T lighting control adapter to activate the group control function. Up to 10 groups of lights can be created, each with individual settings.
Input Voltage: Maximum Current: Working Temperature : Working Humidity : Package Dimensions : G.W. per pack : |
12V 0.1A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) 0.06 kgs |
(LMA-13) Lighting Control Adapter S
Precio habitual €61,16 Guardar €-61,16
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-13) is specially designed for controlling Sun Systems ballast.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-12) Lighting Control Adapter D
Precio habitual €61,16 Guardar €-61,16TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-12) is specially designed for controlling DimLux ballast.
Output Voltage: Maximum Current: Working Temperature : Working Humidity : Packaging Dimensions: |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-11) Lighting Control Adapter P
Precio habitual €61,16 Guardar €-61,16TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
This Lighting Control Adapter D (LMA-11) is specially designed for controlling Phantom ballast.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-24) Lantern Schedule Lighting Adapter
Precio habitual €95,55 Guardar €-95,55TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
Lantern lighting schedule is a lighting routine for vegetating plants that you could find in any college grade horticulture book. It is as follows 12 hours lights on, 5.5 lights off, 1-hour lights on, 5.5 lights off, and repeat schedule. The 1 hour on in between off period fools the plants that stay in vegetative growth state.
This LMA-24 lighting adapter is specially designed to use both two channels on the Hydro-X system to create a lantern schedule control for any lights with 0-10V protocol.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |
(LMA-15) Lighting Control Adapter DLI
Precio habitual €61,16 Guardar €-61,16TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This LMA-15 lighting adapter is specially designed to control the DLI fixtures.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Package Dimensions : G.W. per pack : |
0~11.5V 0.2A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) 0.05kgs |