(SPH-1) RJ12 Splitter Hub
Normaler Preis €34,65 Sparen €-34,65The SPH-1 Splitter Hub from TrolMaster makes the installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.
The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply.
The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.
NOTE: If you are using the SPH-1 to interconnect your lighting systems together back to a single LMA adapter (except for LMA-T and ThinkGrow light system), DO NOT connect the 12 volt dc power supply to the SPH-1.
1x RJ12 Splitter Hub
1x 12V Power Adapter
1x 4 ft RJ12 Cable
Input Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
12VDC 1A 0-50°C ≤90% 16cm(L) x 8.5cm(W) x 9cm(H) |
(DSP-2) Hydro-X Program Device Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSP-2 program device module (timer module) works as a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the main controller. Any device that is 240 volts @ 10A or less can be controlled by the DSP-2.
The DSP-2 works as a multi-function irrigation timer on the Aqua-X and Tent-X. The DSP-2 can be set to activate at a specific time(s) of day or night and configured to function as a recycling timer with or without a maximum number of cycles setting.
It can also be used as a “master pump” controller on the Aqua-X. A master pump would be plugged into the DSP-2. When connected to the Aqua-x 24VAC module, the DSP-2 will automatically turn on the pump when any of the 24VAC irrigation zones are activated.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(DSC-2) CO2 Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSC-2 CO2 control / device module allows users to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-X and Tent-X. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2.
Comes with a cable set
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(4RS-1E) Expander Station 4
Normaler Preis €152,25 Sparen €-152,25The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 220-240 volt “trigger” cable on the 4RS-1 connects to your device / control module. When the device module is activated by the Hydro-x, the 4RS-1 trigger cable will turn on each of the 4 receptacles on the 4RS-1 with a 3-second time delay between each outlet being activated. That minimizes high start-up (inrush current) and allows up to 4 devices to be safely controlled. The 4RS-1 must be installed with a 220/240 volt power circuit (up to 50-amps @ 240vac). Three wire terminals inside the unit accept up to #6 AWG wire making connections to the power source easy.
* This plug is NOT U.L. or E.T.L listed.
Main Power Voltage : Receptacle Quantity : Max Relay Amperage : Working Temperature : Working Humidity : Package Dimensions : G.W. per pack : |
220V or 240V 4 25A 5-60°C 0-99% Noncondensing 27.5cm x 25.5cm x 9.5cm 1.50kgs |
(TC-1) TrolMaster Grow Camera
Normaler Preis €145,95 Sparen €-145,95The TrolMaster Grow Camera (TC-1) is a high-quality surveillance camera specifically designed for grow rooms, providing 24-7 live video monitoring of your grow area. The TC-1’s built-in night vision has been engineered to use invisible (plant safe) IR illuminators to prevent disrupting the morphology of the plant during the dark period. TC-1 features night vision with the ability to see up to 35ft by using ultra-low infrared emissions that are safe for plants during the day and night. TC-1 also utilizes TrolMaster’s free phone app called TM +. Using the TC-1 and the TM + app provides 3 megapixels of low-latency internet live footage. A built-in MicroSD card slot is also available for video recording.
The TC-1 is currently for iPhones & Androids with the latest TM + and TM + Pro app.
Power Supply:
Camera Unit:
(DSD-1) Dry Contact Station for Hydro-X system
Normaler Preis €82,95 Sparen €-82,95The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°FC ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |
(DCC-1) Dual Condition Adapter
Normaler Preis €78,38 Sparen €-78,38The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temperature or humidity is too high; shut off CO2 when turning on exhaust fans. There are many other examples where two conditions can be either combined or split.
The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style modules. (DSC-1, DSH-1/2, DST-1/2 and DSP-1).
Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module.
The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.
(BM-1) Weatherproof Box
Normaler Preis €20,48 Sparen €-20,48TrolMaster's BM-1 weatherproof box is designed to provide protection for the TrolMaster TS-1/2 (Thermostat Stations), HS-1 (Humidistat Station) and ARS-1 (AC Remote Station for the Hydro-X System) controllers from dripping water and low-pressure sprayed water.
(DSV-1) Low-Volt Station
Normaler Preis €82,95 Sparen €-82,95The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.
Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.
This allows the user to directly connect low voltage devices such as solenoids, valves, audiovisual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
Input Voltage : Output Voltage : - Working Temperature : Working Humidity : Packaging Dimensions : |
220~240VAC, 50/60Hz DC24/ AC24 0.25A DC12/ AC12 0.5A 0-50°C ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |
(VFD-1) VFD Station for VFD Fan Speed Control in the Hydro-X Pro System
Normaler Preis €128,63 Sparen €-128,63TrolMaster's VFD-1 Variable Frequency Drive is specifically designed to control Inverters including TECO E510, DELTA ME300, ABB ACS355 (with an FMBA-01 module) etc. with the Hydro-X Pro controller for the purpose of controlling and adjusting the speed of industrial fans in your application.
There is no need to provide power supply for the VFD-1 unit. It can be connected to the Hydro-X Pro with a simple RJ12 phone cable.
12VDC/0.2A,0~50°C,<90%RH
(OM-8) Dry Contact Board
Normaler Preis €313,95 Sparen €-313,95TrolMaster's OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical contacts, and allows up to 12 Amp current through each contact. *The OM-8 should be mounted inside an electric control cabinet, and connected to a power supply between 220-240 VAC.
Max Relay Amperage: Working Temperature: Working Humidity: Package Dimensions: |
12A Per Output 0-40°C ≤90% 25.5cm(L) x 13.5cm(W) x 9.5cm(H) |