Tent-X Connections

Overview

TrolMaster's ECS-9 RJ12 to 4pin connector cable is simply a 12 ft cable to use with Lighting Control Adapter T (LMA-T) and ThinkGrow LEDs with Threaded Waterproof Connectors for interconnecting.

Package Contents

ECS-9 12ft RJ12 to 4-pin IP65 connecter cable

Overview

The SPH-1 Splitter Hub from TrolMaster makes the installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors. 

The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply. 

The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.

NOTE: If you are using the SPH-1 to interconnect your lighting systems together back to a single LMA adapter (except for LMA-T and ThinkGrow light system), DO NOT connect the 12 volt dc power supply to the SPH-1.

Package Contents

• 1x RJ12 Splitter Hub

• 1x 12V Power Adapter

• 1x 4 ft RJ12 Cable

Specifications

Overview

TrolMaster's BM-1 weatherproof box is designed to provide protection for the TrolMaster TS-1/2 (Thermostat Stations), HS-1 (Humidistat Station) and ARS-1 (AC Remote Station for the Hydro-X System) controllers from dripping water and low-pressure sprayed water.

Overview

The TrolMaster ECW-1 RJ12 Waterproof Straight-Through Inline Coupler (2-Pack) is designed to extend the connection between two RJ12 cables, its sealed waterproof connectors prevents water intrusion, thus maintaining a long-lasting and stable connection with high performance between controller, sensors and devices.

Features

• IP68
  

Specifications

Package Contents

RJ12 Waterproof Straight-Through Inline Coupler (2 Packs) 

Overview

The TSS-2 extension cable is simply a 16 ft extension cable to use with the WD-1 water detectors. TrolMaster's TSS-2 has a male and female end and can extend the distance between 2 sensors (or distance between WD-1 module and the sensor).

Features

• Seamless Connection with Water Detector
• Plug & Play

Specifications

Package Contents

• 1 x 16ft Extension Cable

Overview

An additional detector can be added to the WD-1 by using the TSS-1 / T-splitter and water detector (sensor) set. TrolMaster's TSS-1 comes with a T-splitter and an additional water detector in order to have multiple points to detect water by using a single WD-1 module. This is useful when trying to monitor for water spills or floods or to monitor water run-off at multiple locations.

For horticulture, hydroponics, and more.

Features:

• Seamless Connection with Water Detector
• Plug & Play

Specifications:

Package Contents:

• 1 x Touch Spot
• 1 x T-Splitter Touch Spot
• 1 x Stab Holder

Overview

TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.

Package Contents

• 1 x Male-to-Male 16ft RJ12 Cable
• 1 x Male-to-Male 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

Overview

TrolMaster's ECS-2 cable set is designed to connect Hydro-X to most LED drivers with pigtail wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 to Female Barrel cable. Simply connect the two wires from your LED driver to the terminal block, each of the lights being controlled is wired in a “daisy-chain” configuration back to the Hydro-X LMA adapter.

Package Contents

• 1 x 16ft Male-to-Male RJ12 Cable
• 1 x 4ft RJ12 to Female Barrel Cable 
• 1 x RJ12 T-Splitter

Overview

TrolMaster's ECS-3 provides a 5/8” diameter connector for some Fluence brand LED fixtures use Threaded Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / Threaded Waterproof Connector cable.

Package Contents

• 1x 16ft Male-to-Male RJ12 Cable
• 1x 4ft Rj12 to 3 pins IP67 converter Cable 
• 1x RJ12 T-Splitter

Overview

TrolMaster's ECS-4 extension cable is simply a 16 ft extension cable to use with the AMP-2 sensor board. It has a male and female end and can extend the distance between the AMP-2 sensor board and the main controller.

Specifications

Overview

TrolMaster's ECS-6 extension cable is simply a 16 ft extension cable to use with the WCS-1 moisture content sensor. It has a male and female end and can extend the distance between WCS-1 module and the sensor probe.

Specifications

Overview

TrolMaster's ECS-5 provides a 5/8" diameter connector for some Fluence brand newer LED fixtures use PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 / PushLock Waterproof Connector cable.

Package Contents

• 1 x 16 ft RJ12 Cable
• 1 x 4 ft RJ12 to PushLock Waterproof Connector converter cable
• 1 x T-shaped Splitter

Specifications

Overview

TrolMaster's ECS-8 extension cable is simply a 32 ft extension cable to use with the IR emitter in AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1. It has a male and female end and can extend the distance between IR emitter and AC Remote station ARS-1 and Digital Day/Night Remote Controller Beta-1.

Package Contents

1 x ECS-8 32ft Extension Cable

Overview

The ECS-10 is a 25′ coiled RJ12 communication cable. It comes with a 15′ coiled cable with 5′ straight cables on each end. When connecting fixtures that are installed on a lifting system or movable vertical racking, you can use the RJ12 coiled communication cable ECS-10 to allow the fixtures to be mobile and to be moved freely.

Package Contents

RJ12 coiled communication cable x1