







(MBS-TH) Replacement Part 3-in-1 Temp/Humid/Light Sensor for Hydro-X
Normaler Preis €82,95 Sparen €-82,95Overview
TrolMaster's MBS-TH is a 3-in-1 Temp/Humid/Light sensor for the Hydro-X system.
Note: This is a replacement or spare part. The main controller comes with a sensor already.
Features
- Built-In Photocell Detecting Day/Night Mode
- 8 ft RJ12 Cable
- Plug & Play
Specifications
Output Voltage: Maximum Current: Working Temperature : Working Humidity : Packaging Dimensions: |
0~11.5V 0.2A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |










(MBS-PAR) Full Spectrum Quantum Sensor
Normaler Preis €488,25 Sparen €-488,25Overview
TrolMaster's Full Spectrum Quantum Sensor (MBS-PAR) provides the accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements.
Used in conjunction with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact lighting level (in PPFD) that the user selects.
Features
- Onsite Reading
- Plug & Play
Package Contents
- 1 x Full-Spectrum Quantum Sensor
- 1 x 1/2” Post Clamp
- 1 x 4ft RJ12 Cable
- 1 x RJ12 T-Splitter
- 2 x 1/2“ End Cap
Specifications
Working Temperature : Working Humidity : Package Dimensions : |
0-50°C ≤90% 16cm(L) x 5.6cm(W) x 8.6cm(H) |








(MBS-SD) Smoke Detector for Hydro-X
Normaler Preis €60,90 Sparen €-60,90Overview
TrolMaster's Smoke Detector (MBS-SD) will alert you to smoke within your growing area. You can connect up to 5 MBS-SD to a single Hydro-x (HCS-1) controller. You will receive a user-alert on your phone if any of your MBS-SD determine that there is smoke in the environment. This way you can be aware of the potential problem before it gets out of hand.
MBS-SD sensors should remain dry and clean to prevent premature failure.
Do not spray foreign substances or allow water / condensate on the sensors.
Comes with a cable set.
Features
- Small Button for Address Assignment
- Built-In Photocell Detecting Day/Night Mode
- 8 ft RJ12 Cable
- Plug & Play
Specifications
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°F ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |








(MBS-S8) CO2 Sensor for Hydro-X
Normaler Preis €233,10 Sparen €-233,10Overview
TrolMaster's optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.
Comes with a cable set.
Features
- Built-In Photocell Detecting Day/Night Mode
- 8 ft RJ12 Cable
- Plug & Play
Specifications
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions: |
0~11.5V 0.2A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |