
(TDC-4) 5ft AWG #18 Daisy Chain Cord for Model One LED system
Normaler Preis €16,80 Sparen €-16,80Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 5' 10A |
Package Content
-
1x 5ft AWG #18 Daisy Chain Cord for Model One LED system




(TDC-240) 7ft Splitter Power Cord for Model One LED System
Normaler Preis €18,90 Sparen €-0,90Overview
This AWG #18 splitter power is a 7ft split power cord for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. The TDC-120 / 240 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
Input Voltage: 240VAC, 50/60Hz
Length: 7' (213,3 cm)
Amp: 10A
Package Content
-
1x 7ft Splitter Power Cord for Model One LED System AWG#18

(TDC-2) 1ft AWG #18 Daisy Chain Cord for Model One LED system
Normaler Preis €12,60 Sparen €-12,60Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 1' 10A |
Package Content
-
1x 1ft AWG #18 Daisy Chain Cord for Model One LED system

(ICL-300) 4' Inner Canopy LED Bar with Built-in 120 Watt Driver
Normaler Preis €225,75 Sparen €-225,75Overview
The ThinkGrow Model One LED System 4ft Inner Canopy LED Bar with built-in 120 Watt Driver, will revolutionize high-density indoor growing. When applying light to plants only from above the plants, leaves and sections of the plant below the top “canopy” of the plant suffer from low light levels. That is the exact problem the ICL-300 is designed to fix. The ICL-300 emits light in a 300 degree pattern so that when positioned below the canopy, the sections of the plant under the canopy can also get the light they need to produce higher quality and yields. By applying some light to the middle of the plant structure, the user can eliminate lower quality flower formation and replace it with healthy flowers. The modular design of the ICL-300 allows them to be used in all installations regardless of the shape or size of the growing area.
*Power cord and stand are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Auto-sensing 100~277 VAC
- 3-side LED surface
- 300° Lighting coverage
- 4' LED with Four Spectrum
Specifications
PPF: Input Power: Input Voltage: Lifetime: |
>314 umol/s 120W Autosensing 100~277 VAC L90:> 54,000 hrs |
Package Content
- 1x Inner Canopy LED bar
- 2x mounting hooks
- 2x adjustment knobs

(TDC-3) 2ft AWG #18 Daisy Chain Cord for Model One LED system
Normaler Preis €14,70 Sparen €-14,70Overview
This Daisy Chain Power Cord is specially designed for the new Model-One System to interconnect between the LED drivers. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 2' 10A |
Package Content
-
1x 2ft AWG #18 Daisy Chain Cord for Model One LED system

(TLD-4) 90 Watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels
Normaler Preis €60,90 Sparen €-60,90Overview
The TLD-4, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-4 is a modular driver, it can be combined with additional TLD-4 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features four spectrum control channels and can be connected to a TrolMaster HCS or TCS controller to allow for remote control and independent settings for each of the four channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-4 works with the 4ft long TLB-1 or 5ft long TLB-2 LED light bars from ThinkGrow.
*Light bars and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Four Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Four Spectrum Control Channels

(TLB-1) 4' LED bar with 4x Spectrum channels (White+ Deep Red+ Far Red+ UV) for Model One LED system
Normaler Preis €71,40 Sparen €-71,40Overview
4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-1, is an advanced 4' LED light bar that includes four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-1 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. Each TLB-1 provides 90 watts of light , effectively meeting the needs of ALL phases from vegetative to flowering.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>234 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-1 LED Bar

(TDC-1) AWG #18 Splitter Power Cord for Model One LED system
Normaler Preis €15,75 Sparen €-15,75Overview
This AWG #18 splitter power cord is specially designed for the new Model-One System and comes with a split end, designed to connect the power and the controller on one end, and to the drivers on the other end. The Model One system can reduce the number of power outlets and cables required by combining multiple LED drivers together into a single power cable. Each “group” of Model One drivers must be connected to power using one of the TDC-1 cables, and one of the EC-120 or EC-240 power cables (120 or 240 volt). The TDC-1 power cord is used to connect to the main power source and to transfer data from the HCS lighting controller to the LED drivers.. The TDC-2/3/4 are used to connect the power and the control signal from one LED driver, to the next LED driver.
*This pre-sale item will be delivered within 3 weeks.
Features
- Daisy Chain System
Specifications
AWG: Length: Amp: |
18 15cm/ 5.9" 10A |
Package Content
-
1x Splitter Power Cord for Model One System AWG#18








(LMA-T) Lighting Adapter-T for Hydro-X System
Normaler Preis €95,55 Sparen €-95,55Overview
TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option.
The LMA-T works specifically with the ThinkGrow LED systems to provide two channel control, which allows separate control for full-spectrum and deep red output levels on the ThinkGrow LEDs.
The LMA-T simply connects to the lighting control ports Line 1 and Line 2 on the HCS-1. Once connected, the user can then set individual ON and OFF times and the dimming settings for the full spectrum LEDs and also for the deep red LEDs.
The LMA-T then is connected to the RJ-type lighting control cables where each of the LEDs are connected back to the controller in a daisy-chain configuration using plug-and-play connections.
One adaptor could run up to 256 LEDs.
* Convert RJ12 to Water Proof Connector Cable included.
Features
- LED Indicator
- Plug & Play
Specifications
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
0~11.5V 0.2A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) |








(LMA-G) Group Control Adapter
Normaler Preis €95,55 Sparen €-95,55Overview
TrolMaster's LMA-G is specially designed to be used with ThinkGrow single-bar fixtures, i.e. Model-I and I Plus. The LMA-G needs to be connected with a lighting control adaptor to offer a group control function to the grow lights. Each LMA-G can control one group of lights./ Each light group requires one LMA-G. It needs to be connected inline with the LMA-T lighting control adapter to activate the group control function. Up to 10 groups of lights can be created, each with individual settings.
Features
- Designed for ThinkGrow Single-bar LED fixtures
- LCD Display for Group addressing
- Seamless Connection with Hydro-X Pro and LMT-T Lighting Adaptor with RJ12 Cable
- Plug & Play
Specifications
Input Voltage: Maximum Current: Working Temperature : Working Humidity : Package Dimensions : G.W. per pack : |
12V 0.1A 0-50°C ≤90% 15.6cm(L) x 8.3cm(W) x 3cm(H) 0.06 kgs |

(RC-1) Lifter Rigging Cable Kit
Normaler Preis €48,30 Sparen €-48,30Overview
The Lifter Rigging Cable Kit (RC-1) is a high-quality rigging cable specifically designed for use with the ThinkGrow Smart Light Lifter System. This cable kit is built to withstand the weight of your grow lights and is capable of lifting up to 120KG when used with other RC-1 cables. With the Lifter Rigging Cable Kit, you can easily adjust the height of your grow lights to optimize the growth of your plants and make maintenance a breeze.
Specifications
Cable Length: Packaging Dimensions: Gross Weight: |
1.2m each side 170mm(L) x 90mm(W) x 54mm(H) 0.48kg |
Package Contents
- 1 x Lifter Rigging Cable
- 2 x Stainless Steel Eye Plate








(Model-H Plus) ThinkGrow Horticulture LED Grow Light
Normaler Preis €1.573,95 Sparen €-1.573,95Overview
Model-H Plus is a true 5’ wide LED grow light designed to be used in indoor grow rooms for high PPFD cultivation practices in vertical farming. The fixture has a total of 3368 pieces of highly efficient top-bin diodes with a total wattage upgraded to 720 watts, resulting in an 18% PPF increase in performance. Users can have onboard dimming or adjust the spectrum and light intensity by connecting the fixtures with a controller. Four spectrum channels including UV, White (full spectrum), Deep Red and Far Red are fully controllable to customize your desired spectrum/recipe of light your plants need. (Only available on the TrolMaster HCS-2/3). The patented plug-and-play light bar design also offers ease of installation and facilitates future maintenance.
* TrolMaster Lighting Adaptor T (LMA-T) required to work with Hydro-X Controller.
* Comes with a 240V standard power cord.
ThinkGrow LED Volume Discounts
Please note International Shipping: A 20 light minimum order for international shipping is required. Shipping will be done via cargo ship. Cargo fees apply.
Free shipping to lower 48 states: if located in other states, please call the store.at 707.710.0016 so a shipping quote can be provided.
Please send an email to sales@mangotech.store to get a price according to our bulk purchasing chart.
Features
- True 5’ wide fixture to cover 5’ grow racks
- Outstanding Efficiency at 2.8 μmol/J
- Ultimate control on 4 independent spectrum channels (Deep Red, UV, White, Far Red)
- The patented Plug and Play light bar design
- On-board Dimming for more convenience
- External Controllability with 256 fixtures per channel
- Spectrum Group Control: Up to 10 Groups
Package Content
-
1x LED Light Driver
- 8x 5' Wide LED Light Bars
- 1x 12' 240V Power Cord
- 1x 16ft 4 Pins Waterproof Extension Cable
- 2x LED Driver Hanger
Specifications
PPF : | > 2016 μmol/s |
Efficacy : | > 2.8 μmol/J |
Input Power : | 720 W |
BTUs : | 2456.74 BTU/H |
Power Factor : | ≥ 96% |
Fixture Dimensions : | 57"L x 44.6"W x 4.44"H |
Fixture Weight : | 41.8 Ibs |
Mounting Height : | > 6" (15.2cm) Above Canopy |
Lifetime : | L90 >54,000 hrs |
Warranty : | 5 Years Standard Warranty |
Input Voltage : | Autosensing 100-277 V |
Amp Draw : | 220V/6.23A, 240V/3.09A, 277V/2.71A |
Certifications : | ETL, IP56 |
Cord Length : | 10.5 feet |




(LRC-1) Smart Lifter Remote
Normaler Preis €124,95 Sparen €-124,95Overview
The LRC-1 Smart Lifter Remote is designed to be used with the LLT-1 Smart Light Lifters. Its plug & play feature enables users to easily install and operate the light lifter(s) from a distance, and program the LLT-1 light lifters' maximum and minimum range limits. Simple Up and Down manual operation is accomplished using two push-buttons on the LRC-1.
The LRC-1 Lifter Remote can also be connected with the Hydro-X Pro for advanced features such as lifter-group control and more.
Specifications
Input Voltage: Amperage: Working Temperature: Working Humidity: Packaging Dimensions: Gross Weight: |
220-240 V, 50/60 Hz 0.1A 0-40°C ≤90% 13cm(L) x 18.7cm(W) x 8.8cm(H) 0.6kg |
Package Contents
- 1 x ThinkGrow Smart Light Remote (LRC-1)
- 1 x ECS–9 Signal Cable






(LLT-1) ThinkGrow Smart Light Lifter
Normaler Preis €576,45 Sparen €-576,45Overview
The LLT-1 light lifter is part of the ThinkGrow modular light lifter system. Its cutting-edge synchronized multi-lifter the operation provides users with a customizable, expandable and easy-to-install system. The lifter is ETL listed and the cable can lift up to 132 lbs, 8.8ft.
The light lifter design enables easy, two-man installation. Unlike the traditional complicated lifter system where precise calculation and teams of engineers are needed, the LLT-1 reduces assembly time and manpower without compromising quality or safety. The easily expandable modular lifter system provides maximum flexibility and user customization.
The light system can also connect to the Hydro-X Pro Control System for additional features. The LLT-1 can lift and lower multiple lights and connect to other LLT-1 lifters via daisy chain data cables, enabling users to connect, control and program synchronized operation on multiple light lifters, from a single controller.
Specifications
Input Voltage: Input Power: Working Temperature: Working Humidity: Lifting Range: Maximum Lifting Weight: Packaging Dimensions: Gross Weight: |
220-240 V, 50/60 Hz ≤100W 0-40°C ≤90% ≤ 8.8 ft / 2.7 m / 106 inches ≤ 132 lbs / 60 kg 57.2cm(L) x 26.5cm(W) x 19.5cm(H) 10.38kg |
Package Contents
- 1 x ThinkGrow Smart Light Lifter (LLT-1)
- 1 x Power Cable
- 1 x Signal Cable
- Afrikaans
- Albanian
- Amharic
- Arabic
- Armenian
- Azerbaijani
- Bengali
- Bulgarian
- Catalan
- Croatian
- Czech
- Danish
- Dutch
- English
- Estonian
- Finnish
- French
- German
- Greek
- Gujarati
- Haitian Creole
- Hebrew
- Hindi
- Hungarian
- Icelandic
- Indonesian
- Italian
- Japanese
- Kannada
- Kazakh
- Khmer
- Korean
- Kurdish (Kurmanji)
- Lao
- Latvian
- Lithuanian
- Malagasy
- Malay
- Malayalam
- Maltese
- Maori
- Marathi
- Myanmar (Burmese)
- Nepali
- Norwegian
- Pashto
- Persian
- Polish
- Portuguese
- Punjabi
- Romanian
- Russian
- Samoan
- Simplified Chinese
- Slovak
- Slovenian
- Spanish
- Swedish
- Tamil
- Telugu
- Thai
- Traditional Chinese
- Turkish
- Ukrainian
- Urdu
- Vietnamese
- Welsh

(TLD-2) 90 Watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels
Normaler Preis €54,60 Sparen €-54,60Overview
The TLD-2, is a modular plug-and-play LED driver that is designed to operate a single 90-watt LED bar. Since the TLD-2 is a modular driver, it can be combined with additional TLD-2 drivers to create a complete lighting system that can fit into any size space, and provide up to 1400 umol of light. It features two spectrum control channels and can be connected to a TrolMaster Hydro-X or Tent-X system controller to allow remote control and independent settings for each of the two channels. That provides the ability to have customized lighting spectrum and timing control. The TLD-2 works with the FR-1, DR-1 or UV-1 LED light bars from ThinkGrow.
*The light bar and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- Two Adjustable Spectrum Channels
- Auto-sensing Voltage
- Plug and Play
- Mix and Match
Specifications
Input Power: Input Voltage: Amp Draw: |
90W 100~277VAC, 50/60Hz 0.77A@120V/ 0.39A@240V/ 0.35A@277V |
Package Content
- 1x 90 watt ThinkGrow Model One LED Driver with Two Spectrum Control Channels

(TLB-2) 5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System
Normaler Preis €78,75 Sparen €-78,75Overview
5' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System, TLB-2, is an advanced 5' LED light bar that features four spectrum channels, including full spectrum , deep red, far red, and UV. When connected to a TrolMaster controller, the TLB-2 can replicate natural sunlight properties by allowing the user to adjust the actual light spectrum. This empowers growers to customize the desired light recipe for their plants, taking advantage of the four separately controllable spectrum channels. Each TLB-1 provides 90 watts of light.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 5' LED Bar with Four Spectrum
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>252 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x TLB-2 LED Bar

(FR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED system
Normaler Preis €54,60 Sparen €-54,60Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Far Red) for Model One LED System, the FR-1, is a standard 4’ LED light bar that incorporates two spectrum channels, full spectrum and far red. When connected to a TrolMaster controller, it effectively covers essential growth stages from vegetative to flowering. By providing targeted far-red light to the crop at specific times, you can manipulate plant responses, accelerate flowering, and increase overall yield.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Far Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x FR-1 LED Bar

(DR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System
Normaler Preis €50,40 Sparen €-50,40Overview
4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
Features
- 4' LED Bar with White and Deep Red
- Plug and Play
Specifications
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
Package Content
- 1x DR-1 LED Bar

(UH-2) ThinkGrow Unitstrut Hanger
Normaler Preis €26,25 Sparen €-26,25Overview
The UH-2 Unistrut Hanger is designed for ThinkGrow LEDs Model-I and Model-I Plus.
Specifications
Product Dimensions: 17(L)*9(W)*.54(H) cm






(UH-1) ThinkGrow Unitstrut Hanger
Normaler Preis €26,25 Sparen €-26,25Overview
The UH-1 Unistrut Hanger is designed for ThinkGrow LEDs Model-H / Model-W / Model-V.
Â
Specifications
Product Dimensions : 13.8cm(L) x 17cm(W) x 2.5cm(H)






(OPA-1) Smart Junction Box
Normaler Preis €208,95 Sparen €-208,95Overview
The ThinkGrow Smart Junction Box is an electronic circuit breaker and energy meter that is connected in line with each "string" of LEDs to monitor and protect the circuit from power overload. If the circuit protector detects unusual high amperage, the power to the LEDs will be turned off to prevent damage to the LEDs and the Daisy Chain Power Cord System.
Package Contents
- Smart Junction Box (OPA-1) x 1
- Alternate Waterproof Cable Gland Seal (for 12/3 and 14/3 cable) x 1
Features
- Overcurrent protection
- Power Surge Protection
- Power Consumption Data Collection
- On-site monitoring
- Wireless Power-data Logging (with Hydro-X Pro)
Specifications
Input power : Rated voltage : Rated current : Shut-off Point Range : Overcurrent protection point : Sensitivity to protection : Voltage accuracy : Current accuracy : Power accuracy : PF accuracy : Operating temperature: Working Humidity : Product dimensions : G.W. per pack : Certifications : FCCID : |
00~277VAC, 50/60 Hz 220~240V 30A 15A/ 20A/ 30A +120% Response within 0.5s ±2% readings/ ±1% shut-off point ±2% readings/ ±1% shut-off point ±5% readings/ ±1% shut-off point ±10% 0~40 °C 5~95%RH 10.405 x 26.616 x 7.077 (xm) 940 g ETL/FCC 2A3 3F-OPA-1 |