(DSH-2) Humidity Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSH-2 Humidity control / device modules allow users to easily connect and control standard humidifying or dehumidifying devices to the Hydro-X and Tent-X. The DSH modules are rated @ 10-amps.
*If using for dehumidifiers, apply less than 7-amps to avoid current overload.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(HS-1) Humidistat Station for Hydro-X System
Normaler Preis €128,63 Sparen €-128,63The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way to control your dehumidifiers by eliminating the need to control the high-amperage / inrush current associated with dehumidifiers.
Output Voltage : Maximum Current : Working Temperature : Working Humidity : Packaging Dimensions : |
24V 1A 0-50°C ≤90% 16cm(L) x 8.6cm(W) x 8.6cm(H) |
(DSD-1) Dry Contact Station for Hydro-X system
Normaler Preis €82,95 Sparen €-82,95The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°FC ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |
(DCC-1) Dual Condition Adapter
Normaler Preis €78,38 Sparen €-78,38The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temperature or humidity is too high; shut off CO2 when turning on exhaust fans. There are many other examples where two conditions can be either combined or split.
The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style modules. (DSC-1, DSH-1/2, DST-1/2 and DSP-1).
Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module.
The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.
(DSV-1) Low-Volt Station
Normaler Preis €82,95 Sparen €-82,95The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.
Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.
This allows the user to directly connect low voltage devices such as solenoids, valves, audiovisual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
Input Voltage : Output Voltage : - Working Temperature : Working Humidity : Packaging Dimensions : |
220~240VAC, 50/60Hz DC24/ AC24 0.25A DC12/ AC12 0.5A 0-50°C ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |