(DCA-10) 10AWG Daisy Chain Power Cord
Normaler Preis €93,45 Sparen €-93,45The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DCA-12) 12AWG Daisy Chain Power Cord
Normaler Preis €82,95 Sparen €-82,95The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DCA-14) 14AWG Daisy Chain Power Cord
Normaler Preis €72,45 Sparen €-72,45The DCA-10/12/14 is a 5' long AWG#10/12/14 daisy-chain power cord for all ThinkGrow LEDs, designed to interconnect LED drivers, the system can eliminate a massive amount of power outlets, and reduce the number of power cables required. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DCC-1) Dual Condition Adapter
Normaler Preis €78,38 Sparen €-78,38The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temperature or humidity is too high; shut off CO2 when turning on exhaust fans. There are many other examples where two conditions can be either combined or split.
The DCC-1 is designed to be used in combination with one of TrolMaster’s plug-in style modules. (DSC-1, DSH-1/2, DST-1/2 and DSP-1).
Once connected to the plug-in module using the RJ12 cable built-into the DCC-1, the DCC-1 will act in concert with that plug-in module to control whatever device is connected to the plug-in module.
The DCC-1 can also be set to work in two distinct ways using the “Interlock” function.
(DEA-10) 3' 10AWG Extension Power Cord
Normaler Preis €72,45 Sparen €-72,45The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
The DEA-10L is a 10' Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.
Shipping timelines are estimates and are not guaranteed. The estimated delivery time is EARLY AUGUST.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DEA-10L) 10' 10AWG Extension Power Cord
Normaler Preis €93,45 Sparen €-93,45The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
The DEA-10L is a 10' Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.
Shipping timelines are estimates and are not guaranteed. The estimated delivery time is EARLY AUGUST.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DEA-12) 3' 12AWG Extension Power Cord
Normaler Preis €67,20 Sparen €-67,20The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
The DEA-10L is a 10' Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.
Shipping timelines are estimates and are not guaranteed. The estimated delivery time is EARLY AUGUST.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DEA-14) 3' 14AWG Extension Power Cord
Normaler Preis €61,95 Sparen €-61,95The DEA-10/12/14 is a 3' long AWG#10/12/14 Daisy-chain Extension Power Cord for all ThinkGrow LEDs, designed to extend the length of the Daisy-chain power cord, to satisfy a variety of applications. Depending on the power source of your facility, using the daisy-chain power cables can provide power to multiple lighting fixtures.
The DEA-10L is a 10' Daisy-Chain Extension Power Cord to extend the power cord cable to interconnect between LED drivers to reduce power outlets and infrastructure costs.
Shipping timelines are estimates and are not guaranteed. The estimated delivery time is EARLY AUGUST.
For a more specific delivery ETA based on the exact item(s) you want to purchase, please call us at 1 (707) 710-0016 or email us at info@mangotech.store before placing an order.
(DFM-1) 1" Digital Flow Meter
Normaler Preis €103,95 Sparen €-103,95TrolMaster's DFM-1 is a 1" digital inline flow meter that provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system.
When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “by volume”, and the DFM-1 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-1 sensor can also be used for future functions and may include the ability to sense water leaks and/or line blockages.
Working Temperature : | 0-50°C |
Working Humidity : | ≤90% |
Packaging Dimensions : | 16cm(L) x 8.5cm(W) x 9cm(H) |
(DFM-2) 1.25" Digital Flow Meter
Normaler Preis €110,25 Sparen €-110,25The DFM-2 is a 1.25" digital inline flow meter that provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-2 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-2 sensor can also be used for future functions and may include the ability to sense water leaks and/or line blockages.
Working Temperature : | 0-50°C |
Working Humidity : | ≤90% |
Packaging Dimensions : | 25.5cm(L) x 13.5cm(W) x 8cm(H) |
(DFM-3) 1.5” Digital Flow Meter
Normaler Preis €115,50 Sparen €-115,50The DFM-3 is a 1.5" digital inline flow meter that provides accurate measurements of water or a nutrient solution flowing through a fluid pipe. It is specially designed for the Aqua-X Pro system. When it’s used with the Aqua-X Pro, users can set the irrigation schedule to be controlled “By volume”, and the DFM-3 will measure and allow the desired and precise amount of nutrient solution to be used. The DFM-3 sensor can also be used for future functions and may include the ability to sense water leaks and/or line blockages.
Working Temperature : | 0-50°C |
Working Humidity : | ≤90% |
Packaging Dimensions : | 25.5cm(L) x 13.5cm(W) x 8cm(H) |
(DMC-1) 24V DC Greenhouse Roll Up Motor Controller
Normaler Preis €399,00 Sparen €-399,00The DMC-1 is an advanced motor driver for agricultural greenhouse curtains that enables both manual and automated control of curtain motors. It is designed for seamless integration with the GCS (Green-X Greenhouse System) and provides precise motor control, including forward and reverse operation, stopping functions, timeout shutoff, and overcurrent protection. This integration enhances greenhouse management by allowing centralized monitoring and control, optimizing environmental conditions for plant growth and improving operational efficiency.
Input Voltage: 100-240VAC, 50/60Hz
Working Environments:
- Temperature: 32-104°F (0-40°C)
- Humidity: ≤90% RH
Waterproof Rating: IP44
American Wire Gauge (AWG):
- Output: Cannot be less than 16 AWG
Communication Method: RS-485 (4-pin waterproof connector)
No-load Power Consumption: <2W (at 240V input)
(DR-1) 4' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System
Normaler Preis €35,00 Sparen €-35,004' LED Bar with 2x Spectrum Channels (Full Spectrum + Deep Red) for Model One System , the DR-1, is a standard 4’ LED light bar that features full spectrum and deep red spectrum channels. It can be connected to a TrolMaster controller, allowing growers to select from a range of spectrum recipes for different crops and growth stages. This flexibility can be achieved through the on-board dimming knob or compatible controllers.
*Driver and power cord are not included.
*This pre-sale item will be delivered within 3 weeks.
PPF: Input Power: Mounting Height: Lifetime: |
>243 umol/s 90W >6" (15.2cm Above Canopy) L90:> 54,000 hrs |
(DSC-2) CO2 Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSC-2 CO2 control / device module allows users to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-X and Tent-X. Any CO2 device that is 10-amps @ 240 volts or less can be controlled by the DSC-2.
Comes with a cable set
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(DSD-1) Dry Contact Station for Hydro-X system
Normaler Preis €82,95 Sparen €-82,95The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°FC ≤90% 8.5cm(L) x 8cm(W) x 9cm(H) |
(DSD-2E) Dry Contact Station for Hydro-X system
Normaler Preis €89,00 Sparen €-89,00The Trolmaster DSD-2E Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
100~240 VAC, 50/60Hz 10A 100~240 VAC, 50/60Hz 32-122°F ≤90% 85mm(L) x 80mm(W) x 90mm(H) |
(DSD-2U) Dry Contact Station for Hydro-X system
Normaler Preis €89,00 Sparen €-89,00The Trolmaster DSD-2U Dry-contact module provides a simple and flexible solution to the user’s who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to activate the equipment. The DSD-1 is the product that you need to control those types of devices. It can be configured to work as the other Trolmaster power modules work, such as DST, DSH, DSC, DSH.
Comes with a cable set.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : Packaging Dimensions : |
100~240 VAC, 50/60Hz 10A 100~240 VAC, 50/60Hz 32-122°F ≤90% 85mm(L) x 80mm(W) x 90mm(H) |
(DSE-2E) CO2 Emergency Stop Station
Normaler Preis €109,20 Sparen €-109,20TrolMaster's DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 220V controlled outlet that supplies the power to CO2 solenoid valves in normal operation. The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.
Input Voltage: Output Current: Output Voltage: Working Temperature : Working Humidity : Package Dimensions: G.W. per pack: |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤ 90% 8.5cm(L) x 8cm(W) x 9cm(H) 0.34kgs |
(DSH-2) Humidity Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSH-2 Humidity control / device modules allow users to easily connect and control standard humidifying or dehumidifying devices to the Hydro-X and Tent-X. The DSH modules are rated @ 10-amps.
*If using for dehumidifiers, apply less than 7-amps to avoid current overload.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |
(DSP-2) Hydro-X Program Device Station (UK/EU)
Normaler Preis €92,40 Sparen €-92,40The TrolMaster DSP-2 program device module (timer module) works as a multi-function timer. The DSP-2 allows the user to easily connect any device that needs to be controlled by TIME to the main controller. Any device that is 240 volts @ 10A or less can be controlled by the DSP-2.
The DSP-2 works as a multi-function irrigation timer on the Aqua-X and Tent-X. The DSP-2 can be set to activate at a specific time(s) of day or night and configured to function as a recycling timer with or without a maximum number of cycles setting.
It can also be used as a “master pump” controller on the Aqua-X. A master pump would be plugged into the DSP-2. When connected to the Aqua-x 24VAC module, the DSP-2 will automatically turn on the pump when any of the 24VAC irrigation zones are activated.
Input Voltage : Output Current : Output Voltage : Working Temperature : Working Humidity : |
220~240 VAC, 50/60Hz 10A 220~240 VAC, 50/60Hz 0-50°C ≤90% |